• atulsharma.cse@gmail.com
• May 24, 2014
• No Comments

Hi,
This Tutorial is to connect two different PC in Packet tracer, If you are not familiar with OSI model basics, go to our CCNA OSI Model video on youtube ” OSI network kings ” ,

SO for example

Pc1 ———————————connected to —————————-PC2

pc1 – 192.168.1.1

pc2 – 192.168.1.2

Points to Remember,

1. You can only assign Class A, Class B, Class C ?ip address.

2. Range between 1 – 229

3. You cannot assign all host value 0 , and 1 too, It means you cannot assign Network ID and broadcast ip address.

Lets start